Tubeless Rim Tape 35mm / 10m

The Muc-Off Tubeless Rim Tape is made from our own proprietary performance material with a pressure-sensitive adhesive to provide just the right amount of stretch whilst maintaining the durability and strength needed to create a lasting airtight seal. It's semi-transparent material makes locating the valve hole easy. Supplied with 4x Seal Patches. Available in a 10m roll in 6 widths to suit most Road, CX, Gravel, MTB and Plus-sized rims. Why not also grab yourself a pair of our Tubeless Valves to go along with your tubeless setup. Key Features • The tape itself is made from a semi-transparent material so that you can still easily locate your valve hole • Infamous Muc-Off pink so even the inside of your rims stay looking fresh AF • Comes with four seal patches, so you’re never caught short • Comes in 6 different widths to suit most Road, CX, Gravel, MTB and Plus-sized rims • Extreme strength and durability • Pressure sensitive adhesive ensures the ultimate air-tight seal • Engineered to stretch to fit perfectly in the contour of your rim • Comes as 10m roll - allowing for 4 applications

How to Use • First up, clean your rim using our Glue & Selant remover to get rid of any unwanted residue that might be left behind from a previous setup • Select the correct sized rim tape to match up with the width of your wheel's rim (check out our guide above) • Locate the valve hole • Peel back some of your Rim Tape and begin to apply and press down on the opposite side to your valve hole • With your thumb holding down the tape, lightly peel the tape back and continue to press down to ensure you've got a firm bond with the rim itself • Rotate the wheel around as you continue to apply the tape • Once you've gone all the way around the rim, continue on to create an overlap of around 10 - 15cms • Cut the tape at a 45 degree angle and press the edge down • Check for any air bubbles and gaps, ensuring to press down firmly if you do spot any • Apply the finishing patch over the edge of the tape to ensure a firm seal • Push the valve through the rim hole and secure with the 'O' ring and locking ring • Refit the tyre and inflate - you're now ready to add your sealant!