Ultimate Tubeless Set Kit XC/T

The Muc-Off Ultimate Tubeless Kit contains everything needed to get a tubeless-ready wheelset set up and ready to roll. Each Kit contains a Muc-Off Tubeless Rim Tape, Seal Patches, 2 CNC-machined black tubeless Valves and 2 pouches of No Puncture Hassle Tubeless Sealant. Key Features • Everything you need in one simple kit • Say goodbye to carrying spare tubes! • Contains rim tape & valves • Contains tubeless sealant • For MTB/road/gravel

How to Use • Remove all old rim strip or tape and clean rim. • Make sure the rim is clean and dry before applying tape. • Get the tape from the packet and line it up from the opposite side of the valve. • Start by unwinding a small amount of the tape and pressing it down using your thumb or finger to hold pressure down. • Continue the entire way around the rim. • Overlap the tape by roughly 10 – 15cm • Once cut sketch and pull the tape down to create a seal • Go around the rim with your thumb to make sure there is no air pockets or messed areas. • Using a small pin locate the valve hole and cleanly pierce the tape ready for the valve • Grab your tubeless valve and remove the lock ring and o ring • Chose the right rubber fitment for your rim tape and insert valve into rim • Refit O-ring and Lock ring making sure you lock the valve in • Re-fit your tyre of choice carful not to damage the tape • Inflate tyre to create a fit • Release Air and remove valve core using the spare valve cap • Grab the sealant pouch and give it a shake • Unscrew the cap and fit on the valve in a up right position • While holding the pouch spin the wheel downward so that the pouch is now upside down • Insert the sealant by rolling the pouch down • Spin wheel back up right and remove pouch • Reinsert valve core and inflate to your pressure